View Issue Details
ID | Project | Category | View Status | Date Submitted | Last Update |
---|---|---|---|---|---|
0002661 | FSSCP | user interface | public | 2012-06-02 18:50 | 2020-04-13 19:13 |
Reporter | z64555 | Assigned To | |||
Priority | low | Severity | minor | Reproducibility | always |
Status | resolved | Resolution | fixed | ||
Platform | Acer Aspire 3680 | OS | Microsoft Windows | OS Version | XP SP3 |
Product Version | 3.6.13 | ||||
Summary | 0002661: Bank axis does not work with Rx, Ry, Rz | ||||
Description | When mapped to the Rx, Ry, or Rz axis, the Bank control does not function (i.e. any position of the joystick will not roll the craft). | ||||
Steps To Reproduce | Note: You must have a controller that has an Rx, Ry, or Rz axis to begin with, or have controller drivers/software that can reconfigure it's axiis. 1. Configure your controller to have one or all of the R axiis 2. Run FSO 3. Open Options, and map the R axis you just configured your controller to have 4. Close Options, and Open the Tech Room 5. Select a mission from the Mission Simulator and run it (I suggest one of the training missions) 6. Try to bank in mission | ||||
Tags | No tags attached. | ||||
|
Probably a derp: 3.6.14 RC6 has the same issue |
|
Based on the code in joy_get_pos (joy.cpp:940) it appears only 4 axis are actually used at any one time by FSO even if 6 are supported. |
|
It also doesn't matter if it's a DirectInput device or not, (joy.cpp::1246). So, I guess it's safe to say that joy.cpp has potential for updates. :) |
|
I know, it's an old one, but is this still an issue? I tried it with my Joypad and it works perfectly (at least when using the Rx axis). |
|
From emkay's report, this must have been fixed at some point. |
Date Modified | Username | Field | Change |
---|---|---|---|
2012-06-02 18:50 | z64555 | New Issue | |
2012-06-02 21:00 | z64555 | Note Added: 0013625 | |
2012-06-02 23:41 | iss_mneur | Note Added: 0013628 | |
2012-06-03 04:11 | z64555 | Note Added: 0013630 | |
2014-08-18 20:19 | emkay | Note Added: 0016238 | |
2020-04-13 19:13 | Goober5000 | Status | new => resolved |
2020-04-13 19:13 | Goober5000 | Resolution | open => fixed |
2020-04-13 19:13 | Goober5000 | Note Added: 0016968 |