View Issue Details

IDProjectCategoryView StatusLast Update
0002661FSSCPuser interfacepublic2020-04-13 19:13
Reporterz64555 Assigned To 
PrioritylowSeverityminorReproducibilityalways
Status resolvedResolutionfixed 
PlatformAcer Aspire 3680OSMicrosoft WindowsOS VersionXP SP3
Product Version3.6.13 
Summary0002661: Bank axis does not work with Rx, Ry, Rz
DescriptionWhen mapped to the Rx, Ry, or Rz axis, the Bank control does not function (i.e. any position of the joystick will not roll the craft).
Steps To ReproduceNote: You must have a controller that has an Rx, Ry, or Rz axis to begin with, or have controller drivers/software that can reconfigure it's axiis.

1. Configure your controller to have one or all of the R axiis
2. Run FSO
3. Open Options, and map the R axis you just configured your controller to have
4. Close Options, and Open the Tech Room
5. Select a mission from the Mission Simulator and run it (I suggest one of the training missions)
6. Try to bank in mission
TagsNo tags attached.

Activities

z64555

2012-06-02 21:00

developer   ~0013625

Probably a derp:

3.6.14 RC6 has the same issue

iss_mneur

2012-06-02 23:41

developer   ~0013628

Based on the code in joy_get_pos (joy.cpp:940) it appears only 4 axis are actually used at any one time by FSO even if 6 are supported.

z64555

2012-06-03 04:11

developer   ~0013630

It also doesn't matter if it's a DirectInput device or not, (joy.cpp::1246).

So, I guess it's safe to say that joy.cpp has potential for updates. :)

emkay

2014-08-18 20:19

reporter   ~0016238

I know, it's an old one, but is this still an issue? I tried it with my Joypad and it works perfectly (at least when using the Rx axis).

Goober5000

2020-04-13 19:13

administrator   ~0016968

From emkay's report, this must have been fixed at some point.

Issue History

Date Modified Username Field Change
2012-06-02 18:50 z64555 New Issue
2012-06-02 21:00 z64555 Note Added: 0013625
2012-06-02 23:41 iss_mneur Note Added: 0013628
2012-06-03 04:11 z64555 Note Added: 0013630
2014-08-18 20:19 emkay Note Added: 0016238
2020-04-13 19:13 Goober5000 Status new => resolved
2020-04-13 19:13 Goober5000 Resolution open => fixed
2020-04-13 19:13 Goober5000 Note Added: 0016968